CO₂ Cylinder Manifold System

Request for Quotation

CO₂ gas is drawn through our SSFCI CO₂ manifold system at one place. This reduces the risk of CO₂ cylinder's mishandling. This even eliminates the individual cylinder's transportation to different locations where MIG welding sets/user system are located. Low pressure gas is supplied through the pipeline which is possible due to the incorporation of a special system in the CO₂ Cylinder Manifold. This system is properly configured, inter-locked, safe and promises trouble free service. The liquid form of CO₂ is transported in the cylinder or storage tankers which is later on evaporated and expanded to lower pressure. It is cooled which ultimately results in pressure oscillation.

Advantages of SSFCI CO₂ Cylinder Manifold:

• No requirement of exterior heater / steam.
• Clean system.
• No requirement of full time operator.
• No possibility of internal freezing.
• Pressure oscillation reduced to nil.
• Obtainment of pure CO₂ possible because of the impurities filtration.
• Uninterrupted supply of CO₂ at the change of cylinders.
• Highly energy, CO₂ & time economical.

The gaseous CO₂ is supplied by SSFCI manifold system at the desired outlet pressure. Installation at up to 4 outlets with 4 different outlet pressures can be met by us requiring minimal time. The pressure of the gas outflow varies between 1 to 16 bars. Proper care is taken to handle CO₂ gas in a pure & moisture free state, thus, meeting the International Manufacturing Code/ASME Standards. Whenever there is a presence of moisture or oil in the gas, then additional features such as Dryers and Oil Filters can be configured at extra cost. An alarm can as well be configured for indicating low pressure in cylinder.